5db2cd7deb1259906117448268669f7

Fishmeal Production Line Deodorizing Tower

Short Description:

  • With atomizing spray nozzle, assure circulating cooling water to contact waste vapor fully. Get obvious deodorizing performance.
  • With corrosion proof porcelain rings, bigger cooling down area, achieve better deodorizing result.
  • The tower is fully made of Stainless Steel,with corrosion proof and long lifetime.

Normal Model:SCT-1200、SCT-1400

Product Detail

Product Tags

working principle

Deodorizing Tower is cylindrical equipment, vapors move upwards from the bottom, while the cooling water (≤25℃) is sprayed out from the top sprayer like a water film. There is latticed plate at the bottom to put porcelain rings, for release the moving speed of air flow and water flow, meanwhile form a liquid film when the water falls on the ring surface, thus increase the contact area between water and vapors, extent the contact and soluble period, which is help for increasing the absorption of vapors. The cooling water with absorbed vapors flows out from the bottom draining pipe; the remaining vapors that not soluble or absorbed by the water is out from the top, and led into the boiler for high-temperature burning treatment through the pipeline. If the environment permits, the little vapors can be directly discharged.

Structure Introduction

Structure Introduction

No.

Description

No.

Description

1.

Lifting device

9.

Stand

2.

Input & output pipeline

10.

Seal for water

3.

Flange of input & output pipeline

11.

Bottom board of stand

4.

Manhole device

12.

Cooling water pipe

5.

Logo and the base

13.

Flange of cooling water pipe

6.

Porcelain

14.

Grid board

7.

Deodorizing tower body

15.

Sight glass

8.

Deodorizing tower end cover

The Deodorizing Tower mainly consists of main body, sprayer, and porcelain ring.
⑴ The crust of Deodorizing Tower is a stainless steel made closed cylinder design. There are vapors inlet and outlet on the up and down ends of the crust, a manhole at the front side for maintenance. The latticed plate for holding the porcelain ring is fixed inside the tower.
⑵ The sprayer is fixed on the top of inside tower, it is used to distribute the cooling water like a water film, so as to assure the deodorizing effects.
⑶ The porcelain ring is regularly put inside the tower. Because of the several layers, the vapors pass through the gap, thus increasing the contact area between vapors and cooling water, thereafter, good for the absorption and solution of vapors.

Installation collection

Deodorizing Tower  (4) Deodorizing Tower  (3)

  • Previous:
  • Next:

  • Write your message here and send it to us